Easy Joint Paving Jointing Compound 12.5kg – Mushroom

Product Information

The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled that will last for years. A strong joint that will resist the elements and stand the test of time – better than traditional jointing methods Clean out the old jointing product completely to create the correct joint size (see information under the ‘Joints’ section). Do not use EASYJoint if the correct and fully clean joint size cannot be obtained.

Sealing is particularly recommended for porous paving slabs and setts prior to laying and jointing with EASYJoint, to reduce the risk of staining or efflorescence. If sealer is applied after the patio has been laid, do not apply any type of sealer over the joint for at least a month after it has set hard. Only use a breathable sealer, otherwise EASY Joint may or may not remain permeable, and you may seal in any natural efflorescence passing through the stone. These natural salts will disperse over time. Can you apply EASYJoint in freezing conditions? Tiling Adhesives & Grouts We offer a range of tiling adhesives, grouts & silicone for installing porcelain, glass, cement, marble, mosaic, granite and limestone tiles securely to your walls. Our tile adhesives and grouts are heat, mould and water resistant and perfect for fitting tiles in your bathroom or kitchen. Continuously Wash the Paving. The hose operator should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of him/her so that the paving is always wet. This is particularly important in warm/hot weather conditions.

Making Delivery Easy

Overall EASYJoint seems like a good option. It works exactly like it says on the tin and with proper application, there is very little that can go wrong. However, there does seem to be a small issue with production where around 10-20% of the tubs have already set before being opened. Joint-IT

EASYJoint offers all-year-round use. It can be applied any time in the wet warm or freezing cold. It is up to 20 times faster to use than traditional mortar jointing products and there is no need to bend over or be on your hands and knees to trowel it in. The EASYJoint product is extremely strong and offers long-lasting joints for years to come. When used correctly there will be no staining on patio slabs as the products comes away completely cleanly. To further aid this, "point" or "strike" the joint; do not leave it textured. This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes Ideal for use with natural stone, limestone, porcelain, Yorkstone, Indian Stone, granite setts and concrete paving slabsEASYJoint is perfect for patios, paving and paths that only have pedestrian foot traffic, however will not withstand the weight of a car or larger van. We do not recommend EASYJoint for use on driveways due to the types of sub-base and bedding mortar needed. Should I seal my paving slabs before using EASYJoint brush-in patio grout? The same rules apply when working with porcelain paving tiles as with working with stone or concrete. The base on which the porcelain is laid MUST BE PERMEABLE. Less water is needed when applying EASYJoint to porcelain paving, as there is little risk of residue staining. You will find that a small amount of water, added to form it into a slurry, will make it easier to fill the joints properly. When applying to porcelain, to ensure an effective joint, the operator MUST strike the joint off, to compact the grout fully. Compaction forces out air and water which helps the joint harden faster. EASYJoint is available in a selection of 5 colours which is one of it's main selling points. Whatever your project, there is a colour suitable for it. Joint-IT has comparable colours, but only in 3 out of 5 colours. It's important to note that the two products aren't interchangeable, so if you've already started a project with one, you can't simply switch to the other, but the colours are a very similar with 3 of the ranges.