Shelly Motion - disponibile da Aprile 2021 Wireless White

Product Information

Shelly Motion 2 (the Device) is a high-sensitivity, ultra-low power consumption Wi-Fi motion sensor, which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years, and in active transmission (approx. 6 hours/day motion detection) estimated between 12 and 18 months without recharging. For generation 2 hardware it’s possible to select if a device’s input is connected to a button or a switch. Binary sensors are created only if the input mode is set to switch. When the input is of type button you need to use events for your automations. Event entities (generation 1) Here are a few more sensors i made using this method. But in this case these yaml example are placed under the sensor section in your HA config not the binary_sensor section like the example above. sensor:... CAUTION! Be careful not to insert the pin into the round hole of the charging indicator ( A). The reset button has an oblong shape ( B). Tamper detection - 128 levels of vibration sensitivity will notify you about the slightest vibration and if someone moves or dislocates the sensor

Set the blind time of the motion sensor in minutes (from 1 to 1440) after the last detected motion. Below the Main Controls heading, observe the current room temperature, Shelly Device battery as a percentage, and light status of the room.Acting as a tamper alarm and potential warning system for earthquakes, the vibration sensor displays extra info in your app when the shakes are detected. Sadly it’s a binary notification, so you won’t receive the information about the strength of the motion, but you can calibrate this in the settings to fit your needs. Other than the micro USB (hey guys what happened to USB-C?) and a reset pin, there are no other ways to interact with the device physically. WiFi protocol enables hub-less operation which is great for anyone just looking for an easy start and the well-developed app and web interface provide an array of interesting options. Shelly Motion – unique PIR

Using the homeassistant.update_entity service for an entity belonging to a battery-powered device is not possible because most of the time these devices are sleeping (are offline).

Welcome

ATTENTION! Before beginning the installation, please read carefully and entirely this guide and any other documents accompanying the device. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any). Shelly Europe Ltd is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure of following the user and safety instructions in this guide. Introduction to Shelly®