X AUTOHAUX 4pcs 12V Universal 6 Pins Car Power Window Switch Random Light Color

Product Information

The roll up module is wired to that effect so if I use the 6 pin switches I either have to supply the power the other way round with the illumination connection to gnd which would mean that the light would be permanently on with the ignition, like that but using a relay to create a neg switch from the side light live or wired as normal and rewire the roll up. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. If the new one has the same problem, exercise the wires going into the connector and the connector itself. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. At A1 All Cars we are breaking over 200 vehicles at any time and have thousands of parts on the shelf.

That's it reversing polarity the motor turns one way then the other, if you have a wiring diagram the circuit may be clearer I know there are generic drawings on the www, somewhere. All content is viewed and used by you at your own risk and we do not warrant the accuracy or reliability of any of the information. Designed with longevity in mind, Pipeman's Installation Solution makes a highly robust Switch that's perfect for your needs. I happened to wire the windows with two gnd connections and the switch effectively changing one of these to 12v.Below is a picture of the 2 switches I have - they are very slightly different looking - one is marked as made in France, the other has no markings. To be honest having the switches lighting up whenever the ignition is on isn't a problem so i might just do that as it is easiest. Out of the 3 original switches I have 1 good one, 1 temperamental and 1 that I think I duff and after a bit of testing 1 dead passenger window motor . If you only use it 10 times in the car's life then add a few bunches of 50 to clean the contacts, you're not really scratching the surface (except, of course, the surface of the tarnish on the contacts!

The passenger door switch is wired differently as it is connected through the drivers side on - I assume to stop the motor being told to go up and down at the same time? Manufactured in compliance with stringent industry standards, the Pipeman's Installation Solution window switches provide superior performance, especially when in need of a robust solution and reliability.Often the switch panels just need cleaning, I've done two 406 and one 307 and brought them both back to life. I think at some point i will modify the metal plate on the door to accommodate the new switches, they are a little longer but not as wide.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . And this is the view from the back - both have 6 pins, but on the one, two are not useable as they are cropped short - circled in red. Once you've found out which wire sends the window up that is the break wire from the roll up interface.We offer parts on the shelf service, If it's not on the shelf we will gladly remove the part you want from the vehicle for your collection ! Used to have an old VW Polo, 6n1, with a switch that externally looked identical as the LandRover ones. If doing that rolls the window up then you've got the right one otherwise do the same for the other wire. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.